ChangeSet@1.1337.48.1, 2003-10-25 00:49:16+01:00, rmk@flint.arm.linux.org.uk [ARM] Correct acornfb arguments for fb_set_var() ChangeSet@1.1349, 2003-10-24 08:30:34-07:00, Knut_Petersen@t-online.de [PATCH] setkeycode ioctl fix This is a bugfix for setkeycode() in /drivers/char/keyboard.c. If we change a keycode the corresponding bit should be cleared if and only if this keycode is not defined any longer. I believe that this also was intended with the original code, but the implementation is faulty. First off all the first three changed lines are obviously erroneus: oldkey == truekey is false or true, you do not need to inclose this in a for(). I believe the author intended INPUT_KEYCODE(dev,i) == oldkey. But fixing this alone is not enough. If somebody wants to interchange the definition of two keys A and B, the normal way is to use two setkeycode calls: setkeycode (scancode A, keycode B); setkeycode (scancode B, keycode A); The old code does a clearbit(oldkey ..) call even in situations where two keys have the same definition, and this situation arises commonly in the situation mentioned above. Both errors are fixed with this patch. ChangeSet@1.1348, 2003-10-24 08:30:26-07:00, Knut_Petersen@t-online.de [PATCH] input / keyboard / Scancode Set 3 support broken If somebody uses keyboard scancode set 3 it is necessary to explicitly program the keyboard to send make/break codes for all keys and to set autorepeat for all keys. This is critical for some people. One example is the LK461/46W series of keyboards from Digital Equipment Corporations. These are VMS keyboards that are also usable on a normal PC. These keyboards support Scancode Set 2, but for some keys this support is screwed up -- some function keys (e.g. F18/F20) report the same scancode sequence combined with both alt and shift keys. Scancode Set 3 works perfectly if all keys are programmed to give make/break codes. A lot of keyboards manufactured by Cherry only make/break for some (not all!) modifyer keys in scancode set 3 without this fix. ChangeSet@1.1344.2.1, 2003-10-24 07:52:25-07:00, torvalds@home.osdl.org Add a quirk for the Intel ICH-[45] to add special ACPI regions. This fixes resource conflicts due to IO decode that doesn't show up with a normal PCI probe (we do similar quirks for most other chipsets). Without it, the kernel doesn't know about some magic IO decodes for the chips. ChangeSet@1.1337.1.33, 2003-10-24 01:05:03-07:00, davem@nuts.ninka.net [SPARC64]: Get hugetlb support back into working shape. ChangeSet@1.1346, 2003-10-23 22:07:41-07:00, david-b@pacbell.net [PATCH] USB: usb enumeration clears full speed ep0 state This resolves a bug that was recently reported to me by someone enumerating a USB 1.1 modem through a high speed hub. I'm a bit surprised we never saw it before; I think cache/dma timings must usually be strongly in our favor. The problem was that the HC was still using the old ep0 maxpacket value, so when it received an 18 byte device descriptor it would report a packet overrun and enumeration would fail. The fix is straightforward: invalidate the HC's old endpoint state when we change the full speed maxpacket size. (And eventually, we can remove EHCI and OHCI code coping with usbcore not doing this.) ChangeSet@1.1337.38.9, 2003-10-23 17:28:44-07:00, david-b@pacbell.net [PATCH] USB: fix usb-storage self-deadlock This fixes a problem that showed in usb-storage (osdl bugme 1310) and could have shown in other drivers that used usb_reset_device() when they already held dev->serialize: a self-deadlock with some devices. There are some drivers that should likely change so that they grab this lock themselves, since they don't call this during probe() when the lock is already held. The lock protects against config changes by other tasks, which is currently quite rate. ChangeSet@1.1337.38.8, 2003-10-23 17:25:37-07:00, stern@rowland.harvard.edu [PATCH] USB: fix for earlier unusual_devs.h patch An earlier patch caused trouble because it effectively removed the US_FL_FIX_INQUIRY flag for devices with release number higher than 0x5009. This one might cause problems because it explicitly goes against the immediately preceding comment in unusual_devs.h. That comment says that these Casio digital cameras claim to use the CBI transport when in fact they only use CB. However, there have been two reports in the last few weeks from people getting the "unneeded SubClass and Protocol" log messages. One of them was using a device with release number 0x1000, right at the start of the range. The other had a device with release number 0x5010, just beyond the end of the current range. Maybe Casio is marketing two different devices with different behaviors but having the same Vendor, Product, and Release values -- I don't know. ChangeSet@1.1337.38.7, 2003-10-23 17:22:54-07:00, car.busse@gmx.de [PATCH] USB: one more digicam for unusual_devs.h its for the Jenoptik JD 5200 z3 Digicam, to enable it to work as a simple storage device more or less i took the values for the 0x0d96 vendor in the 2.6.0-test7 usb-storage and mixed them with my device id, which seems to work quite well tested with 2.4.22 kernel ChangeSet@1.1337.38.6, 2003-10-23 17:17:32-07:00, abbotti@mev.co.uk [PATCH] USB: ftdi_sio - Perle UltraPort new ids - 2 of 2 Patch by me (Ian Abbott). Removed aliases of FTDI_VID define for consistency. Renamed FTDI_PERLE_PID to FTDI_PERLE_ULTRAPORT_PID. Removed Matrix Orbital and Perle Systems devices from the 8U232AM device table (but left them in the FT232BM device table) as they are known to be FT232BM devices. ChangeSet@1.1337.38.5, 2003-10-23 17:16:34-07:00, abbotti@mev.co.uk [PATCH] USB: ftdi_sio - Perle UltraPort new ids - 1 of 2 Scott Allen's patch to add vid/pid support for Perle Systems UltraPort USB serial converter, merged up with minor whitespace changes by myself (Ian Abbott). ChangeSet@1.1337.38.4, 2003-10-23 17:12:01-07:00, david-b@pacbell.net [PATCH] USB: ACM USB modem fixes Please merge this patch. I've had two success reports from it. Putback comment can be: Fixes some long-standing cdc-acm bugs including: - Oopsing - Probe messages not so excessive - Makes /proc/bus/usb/devices show both interface claims - Now cdc_acm won't hotplug for Ethernet devices (or RNDIS) ChangeSet@1.1337.38.3, 2003-10-23 16:59:03-07:00, dhollis@davehollis.com [PATCH] USB: ax8817x fixes in usbnet.c * ax8817x_set_multicast - use address of dev->data, not contents * ax8817x_write_async_cmd - free request and urb if submit fails ChangeSet@1.1337.38.2, 2003-10-23 16:58:45-07:00, acme@conectiva.com.br [PATCH] leaking info on drivers/usb I'm doing an audit wrt copy_to_user leaking info to userspace, started with drivers/usb, please apply. ChangeSet@1.1341.1.4, 2003-10-23 11:37:48-05:00, lord@sgi.com [XFS] Change XFS maintainer SGI Modid: 2.5.x-xfs:slinx:160507a ChangeSet@1.1341.1.3, 2003-10-23 11:19:26-05:00, overby@sgi.com [XFS] xfs_dir2_node_addname_int had reminants of an old block placement algorithm in it. The old algorithm appeared to look for the first place to put a new data block, and thus a new freespace block (this is where the 'foundindex' variable came from). However, new space in a directory is always added at the lowest file offset as determined by the extent list. So this stuff is never used. I completely ripped out the reminants of the old algorithm, and (again) moved the freespace block add code inside the conditional where a data block is added. SGI Modid: 2.5.x-xfs:slinx:159751a ChangeSet@1.1341.1.2, 2003-10-23 11:15:49-05:00, nathans@sgi.com [XFS] Use an xfs_ino_t to hold the result of inode extraction from a handle, not a possibly 32-bit number SGI Modid: 2.5.x-xfs:slinx:159943a ChangeSet@1.1341.1.1, 2003-10-23 11:10:26-05:00, nathans@sgi.com [XFS] final round of code cleanup, now using 3-clause-bsd in these headers SGI Modid: 2.5.x-xfs:slinx:159997a ChangeSet@1.1337.47.1, 2003-10-23 08:29:45-07:00, torvalds@home.osdl.org Make yenta allocate IO resource windows in same range as in 2.4.x Apparently some laptops (Compaq EVO N620c for one) have something hidden at IO port range 0x1000, and the 2.4.x default of allocating IO starting at 0x4000 is safer. ChangeSet@1.1337.34.6, 2003-10-23 09:27:44-05:00, markh@osdl.org [PATCH] Work around aacraid FW problem If you have a 4gig or greater system, some versions of aacraid firmware have problems if you set HostPhysMemPages >= 0x100000. This can potentially cause data corruption. If you have 4gig or greater memory, this patch sets the HostPhysMemPages to something that the firmware can deal with. ChangeSet@1.1337.34.5, 2003-10-23 09:24:04-05:00, p.lavarre@ieee.org [PATCH] SG_SET_RESERVED_SIZE negative oops I propose the 2.6.0-test8 two-line patch below to teach SG_SET_RESERVED_SIZE to reject a negative size, rather than oops-ing. ChangeSet@1.1337.34.4, 2003-10-23 09:16:59-05:00, andmike@us.ibm.com [PATCH] Add release function to sd for scsi_disk structure This patch removes the delay in calling device_del on the sdev struct device during a surprise removal event. Reference counting functions for sd's scsi_disk structure where also added to fix issues of unregistering when a sd is open. I have tested this patch using scsi_debug with differnt combinations of adds / removes. I mounted both partitioned and un-partitioned sd disks, remove the host, and then did a umount. The ref count debug output shows the objects staying in place prior to the umount and cleaning up once the umount is called. This patch fixes an issue with a delayed call of device_del on the sdev_gendev struct device. - Remove the delayed call to device_del. - Add kobject to sd scsi_disk structure. - Add release function for scsi_disk kobject. - Add get / put functions for scsi_disk and calls to these functions. drivers/scsi/scsi.c | 4 -- drivers/scsi/scsi_sysfs.c | 3 -- drivers/scsi/sd.c | 63 ++++++++++++++++++++++++++++++++++++++++------ 3 files changed, 57 insertions(+), 13 deletions(-) ChangeSet@1.1337.1.32, 2003-10-23 01:49:30-07:00, davem@nuts.ninka.net [SPARC]: Fix do_gettimeofday() as per cset 1.1347.1.17 ChangeSet@1.1337.1.31, 2003-10-22 20:26:38-07:00, torvalds@home.osdl.org Revert bogus IRQ_INPROGRESS clear. It's incorrect for any user of the non-synchronizing irq_disable_nosync(). Cset exclude: torvalds@home.osdl.org|ChangeSet|20031013020955|28777 ChangeSet@1.1337.43.11, 2003-10-22 16:52:04-07:00, alex.williamson@hp.com [PATCH] ia64: trivial ia64 numa/discontig fixes I stumbled on a couple trivial bugs in ia64 numa/discontig support. The first just sets the default number of nodes to something reasonable for a generic kernel, otherwise it's really easy to start walking over your initdata (more error checking should probably be added). The second fixes a memcpy to a physical address. ChangeSet@1.1337.43.10, 2003-10-22 16:49:38-07:00, arun.sharma@intel.com [PATCH] ia64: don't touch IA-32 segment descriptors too early Without this patch, if a signal handler tried to access TLS data (via %gs), things break, because the GS descriptor is zero. To be compatible with i386, we shouldn't be touching the segment descriptors before getting into signal handlers. ChangeSet@1.1337.1.29, 2003-10-22 09:34:55-07:00, torvalds@home.osdl.org Make the pc9800, visws and voyager sub-architectures tell us their NR_IRQ_VECTORS. ChangeSet@1.1337.1.28, 2003-10-22 09:32:47-07:00, torvalds@home.osdl.org bcopy() doesn't return anything. ChangeSet@1.1337.1.27, 2003-10-22 08:44:21-07:00, viro@parcelfarce.linux.theplanet.co.uk [PATCH] fix for do_tty_hangup() access of kfreed memory do_tty_hangup() does fput() on redirect struct file too early - it could've been the only holder of tty_struct we are working with and in that case we'll end up freeing it from fput() and then both reading and modifying kfreed memory. ChangeSet@1.1337.41.57, 2003-10-22 08:25:14-07:00, akpm@osdl.org [PATCH] early_serial_setup array bounds check From: Bjorn Helgaas early_serial_setup() doesn't validate the array index, so a caller could corrupt memory after serial8250_ports[] by supplying a value of port->line that's too large. I haven't seen a failure related to this, but it seems fragile to rely on callers to know how many ports the driver supports. ChangeSet@1.1337.41.56, 2003-10-22 08:25:05-07:00, akpm@osdl.org [PATCH] befs oops fix Need to null-terminate that table. ChangeSet@1.1337.41.55, 2003-10-22 08:24:56-07:00, akpm@osdl.org [PATCH] Altix console driver From: Patrick Gefre Add ia64 Altix serial console driver. ChangeSet@1.1337.41.54, 2003-10-22 08:24:46-07:00, akpm@osdl.org [PATCH] Fix arlan compilation with CONFIG_PROC_FS=n From: Luiz Capitulino when PROC_FS=n, arlan.h will define init_arlan_proc() and cleanup_arlan_proc() as macros. So, whitout the #ifdef/#endif here, we have two definitions. ChangeSet@1.1337.41.53, 2003-10-22 08:24:36-07:00, akpm@osdl.org [PATCH] Kill unneccessary debug printk From: Pavel Machek This printk is unneccessary for quite a long time, please kill it. [I added it, so it should be okay for me to request it being killed..] ChangeSet@1.1337.41.52, 2003-10-22 08:24:27-07:00, akpm@osdl.org [PATCH] /dev/mem range checking From: Bjorn Helgaas ia64 needs more complete checking on the offset which is passed into reads or writes of /dev/mem. This patch factors out the range checking so that the architecture can implement a private version. ChangeSet@1.1337.41.51, 2003-10-22 08:24:18-07:00, akpm@osdl.org [PATCH] Add needed __devexit_p's to two gameport drivers From: "Noah J. Misch" Two gameport drivers need __devexit_p wrapped around their remove functions. A newer binutils caught this is a link error. This patch fixes that. Wrapped a __devexit_p around the 'remove' functions of two gameport drivers. The lack of __devexit_p was wrong according to linux/init.h, differed from the practices in nearby files, and caused a link error with binutils 2.14.90.0.5. ChangeSet@1.1337.41.50, 2003-10-22 08:24:09-07:00, akpm@osdl.org [PATCH] v850: Use irqreturn_t on rte-me2-cb platform From: miles@lsi.nec.co.jp (Miles Bader) The cb_pic_handle_irq function on this platform hadn't been updated to use irqreturn_t; do so. ChangeSet@1.1337.41.49, 2003-10-22 08:24:00-07:00, akpm@osdl.org [PATCH] v850: Don't reserve root-filesystem memory twice From: miles@lsi.nec.co.jp (Miles Bader) This reservation is handled by platform-independent code in 2.6.0, but some platforms _also_ did it in platform-specific code (left over from 2.4.x). ChangeSet@1.1337.41.48, 2003-10-22 08:23:51-07:00, akpm@osdl.org [PATCH] v850: Workaround for tty-driver init-order problem From: miles@lsi.nec.co.jp (Miles Bader) Use `late_initcall' instead of just `__initcall' as a workaround for the fact that (1) simcons_tty_init can't be called before tty_init, (2) tty_init is called via `module_init', (3) if statically linked, module_init == device_init, and (4) there's no ordering of init lists. We can do this easily because simcons is always statically linked, but other tty drivers that depend on tty_init and which must use `module_init' to declare their init routines are likely to be broken. ChangeSet@1.1337.41.47, 2003-10-22 08:23:44-07:00, akpm@osdl.org [PATCH] Fix toshiba.c and neofb.c for CONFIG_PROC_FS=n From: "Noah J. Misch" Allows the Toshiba SMM driver to compile with CONFIG_PROC_FS=n. ChangeSet@1.1337.41.46, 2003-10-22 08:23:35-07:00, akpm@osdl.org [PATCH] pcm_native locking fix It is missing an up() on an error path. ChangeSet@1.1337.41.45, 2003-10-22 08:23:26-07:00, akpm@osdl.org [PATCH] io scheduler oops fixes Peter Osterlund notes oopses in the anticipatory scheduler with slab poisoning enabled due to arq->rb_node.rb_right being uninitialised. So wipe the whole thing when we allocate it. deadline seems to have the same problem. ChangeSet@1.1337.41.44, 2003-10-22 08:23:17-07:00, akpm@osdl.org [PATCH] ipc msg race fix Backport this fix from 2.4 ChangeSet@1.1337.41.43, 2003-10-22 08:23:09-07:00, akpm@osdl.org [PATCH] Fix another CONFIG_MCA=y oops If you have an MCA kernel on non-MCA hardware and load an MCA driver, mca_find_unused_adapter() ends up dereferencing NULL. Teach it about the absence of MCA buses. ChangeSet@1.1337.41.42, 2003-10-22 08:23:01-07:00, akpm@osdl.org [PATCH] Fix oops with CONFIG_MCA=y With CONFIG_MCA=y and no MCA bus present, drivers go oops deep in the kobject code when calling mca_register_driver(). Because there is no MCA subsystem registered against the driver. Plug this in mca_register_driver(). ChangeSet@1.1337.41.41, 2003-10-22 08:22:53-07:00, akpm@osdl.org [PATCH] parport_pc not releasing all ioports From: John Mock If 'parport_pc' is compile as a module, it fails to properly return certain ioport resources after being removed. ChangeSet@1.1337.41.40, 2003-10-22 08:22:45-07:00, akpm@osdl.org [PATCH] DRM modprobe retval fix If you try to load a DRM module when agpgart is not present, modprobe says "Cannot allocate memory", which is rather misleading. Make it return -EINVAL instead. ChangeSet@1.1337.41.39, 2003-10-22 08:22:36-07:00, akpm@osdl.org [PATCH] kcapi.c CONFIG_MODULES=n build fix With CONFIG_MODULES=n this file does not compile because the type of module->owner is not known. Gven that card->owner is probably a null pointer when this driver is statically linked, best thing to do is to just not poke around inside card->owner at all. ChangeSet@1.1337.41.38, 2003-10-22 08:22:28-07:00, akpm@osdl.org [PATCH] make printk more robust with "null" pointers Expand printk's traditional handling of null pointers so that anything in the first page is considered a null pointer. This gives us better behaviour when someone (acpi..) accidentally prints a string which is embedded in a struct, the pointer to which is null. ChangeSet@1.1337.41.37, 2003-10-22 08:22:19-07:00, akpm@osdl.org [PATCH] fix bluetooth broken compilation when PROC_FS=n. From: Luiz Capitulino Fix bluetooth build when CONFIG_PROC_FS=n ChangeSet@1.1337.41.36, 2003-10-22 08:22:11-07:00, akpm@osdl.org [PATCH] fix for register_cpu() From: jbarnes@sgi.com (Jesse Barnes) The patch adds a symlink from /sys/devices/system/node/nodeM/cpuN to the /sys/devices/cpu/cpuN directory so that a userspace program can determine which CPUs belong to which nodes easily. Non-NUMA systems can simply pass NULL in for the root arg and everything will work like it used to. ChangeSet@1.1337.41.35, 2003-10-22 08:22:02-07:00, akpm@osdl.org [PATCH] fix low-memory BUG in slab cache_grow() will call kmem_freepages() if the call to alloc_slabmgmt() fails. But the pages have not been marked PageSlab at this stage, so kmem_freepages() goes BUG. It is more symmetrical to mark the pages as PageSlab in kmem_getpages(). The patch also prunes a bunch of incorrect comments. (PageSlab doesn't actually do anything: its only value is as a debug check. I think the LKCD patch uses it). ChangeSet@1.1337.41.34, 2003-10-22 08:21:54-07:00, akpm@osdl.org [PATCH] Fix JBD memory leak Plug the two-megabyte-per-day memory leak. ChangeSet@1.1337.41.33, 2003-10-22 08:21:45-07:00, akpm@osdl.org [PATCH] JBD kfree() fix I happened to spot this kfree(of complete garbage) - it is on an oh-we-raced-retry path which is obviously exceedingly rare, ChangeSet@1.1337.41.32, 2003-10-22 08:21:39-07:00, akpm@osdl.org [PATCH] fs/binfmt_elf.c:load_elf_binary() doesn't verify interpreter arch From: Peter Bergner In fs/binfmt_elf.c:load_elf_binary() (both 2.6 and 2.4), there is some minimal checking whether the interpreter it's about to load/run is a valid ELF file, but it fails to check whether the interpreter is of the correct arch. We ran into this when a borked powerpc64-linux toolchain set the interpreter on our 64-bit app to our 32-bit ld.so. Executing the app caused the kernel to really chew up memory. I'm assuming x86_64 and sparc64 might possibly see the same behavior. Note I'm not sure of the history behind INTERPRETER_AOUT, so I added the test for INTERPRETER_ELF so as not to change it's behavior in case someone still relies on it. As an aside, it seems the elf_check_arch() macros should really be checking for more than a valid e_machine value. I'd think checking one or more of the e_ident[EI_CLASS], e_ident[EI_DATA] and e_ident[EI_OSABI] values would be required as well, no? ChangeSet@1.1337.41.31, 2003-10-22 08:21:30-07:00, akpm@osdl.org [PATCH] Fix mtd printk warnings From: Jesper Juhl ChangeSet@1.1337.41.30, 2003-10-22 08:21:21-07:00, akpm@osdl.org [PATCH] fix microcode.c for older gcc's Fix a C99ism. ChangeSet@1.1337.41.29, 2003-10-22 08:21:14-07:00, akpm@osdl.org [PATCH] digi_acceleport.c has bogus "address of" operator From: "Kurtis D. Rader" http://bugme.osdl.org/show_bug.cgi?id=1365 The digi_acceleport.c USB serial driver has a bogus "address of" operator that results in BUGs. The problem is that digi_wakeup_write_lock() takes a pointer to a struct usb_serial_port. However, what gets passed is a pointer to a pointer to a struct usb_serial_port. ChangeSet@1.1337.41.28, 2003-10-22 08:21:05-07:00, akpm@osdl.org [PATCH] Kill early might_sleep warnings OK, I give up. Kill all the might_sleep warnings from the early boot process. ChangeSet@1.1337.41.27, 2003-10-22 08:20:57-07:00, akpm@osdl.org [PATCH] export system_running to other files There seems to be no header file which declares system_running. ChangeSet@1.1337.41.26, 2003-10-22 08:20:48-07:00, akpm@osdl.org [PATCH] Quota deadlock fix From: Jan Kara attached patch should fix a quota locking problem causing deadlock (when inode was being released from icache and it caused newly created quota structure to be written). ChangeSet@1.1337.41.25, 2003-10-22 08:20:40-07:00, akpm@osdl.org [PATCH] tmpfs 7/7 write mark_page_accessed From: Hugh Dickins mm/filemap.c's generic_file_aio_write_nolock changed SetPageReferenced to mark_page_accessed in -test3: now follow that in shmem_file_write. ChangeSet@1.1337.41.24, 2003-10-22 08:20:33-07:00, akpm@osdl.org [PATCH] tmpfs 6/7 write i_size_write From: Hugh Dickins mm/shmem.c was converted to i_size_read in -test1, and the remaining references to a file's naked i_size are safely protected by i_sem; but surely shmem_file_write must use i_size_write to update i_size. ChangeSet@1.1337.41.23, 2003-10-22 08:20:23-07:00, akpm@osdl.org [PATCH] tmpfs 5/7 writepage/truncate race fix From: Hugh Dickins If it's possible for a tmpfs page beyond i_size to remain in cache until shmem_truncate repeats truncate_inode_pages, then shmem_writepage's BUG_ON(index >= info->next_index) cannot be completely safe. But it's a useful check in a fragile area, so retain it when not in shmem_truncate. ChangeSet@1.1337.41.22, 2003-10-22 08:20:16-07:00, akpm@osdl.org [PATCH] tmpfs 4/7 getpage/truncate race fix From: Hugh Dickins Extend use of that SHMEM_PAGEIN flag to where shmem_getpage adds a page to the cache. It couldn't have caused a BUG_ON(inode->i_blocks), but if i_size is reduced (from another cpu) the instant after shmem_swp_alloc checks it, shmem_getpage could insert a page into the cache just after truncate_inode_pages has passed through cleaning it, leaving stale data (which may mysteriously reappear if the file is later extended). Easily fixed for tmpfs, using the mechanism just added for swapoff; and probably more important there, since its read from swap can insert non-0 data. But is there not a similar issue, a tiny window, in filemap.c? if truncate_inode_pages comes in between checking i_size and adding new page to cache. Not worth getting excited, but something to beware of. ChangeSet@1.1337.41.21, 2003-10-22 08:20:07-07:00, akpm@osdl.org [PATCH] tmpfs 3/7 swapoff/truncate race fix From: Hugh Dickins On 23 July, Sergey S. Kostyliov reported a tmpfs BUG_ON(inode->i_blocks) during swapoff: my last version of the fix to swapoff/truncate race was inadequate, since I_FREEING might get set or i_size be reduced (from another cpu) the instant after it's tested here. So revert to the previous version of the fix, shmem_truncate calling truncate_inode_pages again, if pages still left in cache; but avoid the recall in usual cases of partial truncation, by having a "pagein" flag to indicate when recall might be necessary. (Since those flags already use VM_ACCOUNT and VM_LOCKED, must redefine another VM_flag for this.) Sergey and 2.4-aa have run fine with this for a couple of months. ChangeSet@1.1337.41.20, 2003-10-22 08:19:58-07:00, akpm@osdl.org [PATCH] tmpfs 2/7 LTP S_ISGID on directories fix From: Hugh Dickins LTP tests the filesystem on /tmp: many failures when tmpfs because it missed the way directories hand down their gid. Also fix ramfs and hugetlbfs. ChangeSet@1.1337.41.19, 2003-10-22 08:19:49-07:00, akpm@osdl.org [PATCH] tmpfs 1/7 LTP ENAMETOOLONG fix From: Hugh Dickins LTP tests the filesystem on /tmp: there are many failures when using tmpfs because simple_lookup forgot to reject filenames longer than the NAME_MAX tmpfs declares in its statfs. This also fixes ramfs and hugetlbfs. ChangeSet@1.1337.41.18, 2003-10-22 08:19:41-07:00, akpm@osdl.org [PATCH] atp870u oops fix This driver is taking uinitialised stack gunk from the pdev[] array and feeding it into pci_read_config_byte() and crashing when modprobed with no hardware present. Fix it to not index past the initialised members of pdev[]. We don't know if this driver works. ChangeSet@1.1337.41.17, 2003-10-22 08:19:33-07:00, akpm@osdl.org [PATCH] Time precision, adjtime(x) vs. gettimeofday From: Stephen Hemminger The following will prevent adjtime from causing time regression. It delays starting the adjtime mechanism for one tick, and keeps gettimeofday inside the window. Only fixes i386, but changes to other arch would be similar. Running a simple clock test program and playing with adjtime demonstrates that this fixes the problem (and 2.6.0-test6 is broken). But given the fragile nature of the timer code, it should go through some more testing before inclusion. ChangeSet@1.1337.41.16, 2003-10-22 08:19:24-07:00, akpm@osdl.org [PATCH] Fix unmap_vmas() compile warning Silence a bogus "may be used uninitialised" warning. It only affects architectures which use the tlb_finish_mmu() args. ChangeSet@1.1337.41.15, 2003-10-22 08:19:16-07:00, akpm@osdl.org [PATCH] ia32 limit_regions update Sync this up with 2.4: ChangeSet@1.404.2.2 2002-05-06 21:30:10-03:00 hch@infradead.org [PATCH] memsetup fixes (again) The mem= fixes from Red Hat's tree had a small bug: if mem= was not actually used with the additional features, but int plain old way, is used the value as the size of memory it wants, not the upper limit. The problem with this is that there is a small difference due to memory holes. I had one report of a person using mem= to reduce memory size for a broken i386 chipset thaty only supports 64MB cached and the rest as mtd/slram device for swap. I got broken as the boundaries changed. ChangeSet@1.1337.41.14, 2003-10-22 08:19:08-07:00, akpm@osdl.org [PATCH] scsi: handle zero-length requests From: Jens Axboe The command 'eject /dev/scd0' sends a START_STOP command to the device with the data direction set to SCSI_DATA_WRITE but a transfer length of zero. This causes a problem for some code paths. ChangeSet@1.1337.41.13, 2003-10-22 08:18:59-07:00, akpm@osdl.org [PATCH] fix split_vma vs. invalidate_mmap_range_list race From: "V. Rajesh" If a vma is already present in an i_mmap list of a mapping, then it is racy to update the vm_start, vm_end, and vm_pgoff members of the vma without holding the mapping's i_shared_sem. This is because the updates can race with invalidate_mmap_range_list. I audited all the places that assign vm_start, vm_end, and vm_pgoff. AFAIK, the following is the list of questionable places: 1) This patch fixes the racy split_vma. Kernel 2.4 does the right thing, but the following changesets introduced a race. http://linux.bkbits.net:8080/linux-2.5/patch@1.536.34.4 http://linux.bkbits.net:8080/linux-2.5/patch@1.536.34.5 You can use the patch and programs in the following URL to trigger the race. http://www-personal.engin.umich.edu/~vrajesh/linux/truncate-race/ 2) This patch also locks a small racy window in vma_merge. 3) In few cases vma_merge and do_mremap expand a vma by adding extra length to vm_end without holding i_shared_sem. I think that's fine. 4) In arch/sparc64, vm_end is updated without holding i_shared_sem. Check make_hugetlb_page_present. I hope that is fine, but I am not sure. ChangeSet@1.1337.1.25, 2003-10-22 03:54:53-07:00, davem@nuts.ninka.net [NET COMPAT]: Fix hangs caused by bugs in do_netfilter_replace(). It is illegal to try to access things via userspace pointers after set_fs(KERNEL_DS), and that is exactly what this function was doing. Fix by using compat_alloc_user_user_space(), this preserves the copy minimization the original code had. ChangeSet@1.1337.1.24, 2003-10-22 02:55:23-07:00, davem@nuts.ninka.net [TG3]: Disable/enable timer in suspend/resume. ChangeSet@1.1337.1.23, 2003-10-22 02:23:04-07:00, davem@nuts.ninka.net [IPV6]: Set fl->proto in _decode_sesseion6. ChangeSet@1.1337.41.11, 2003-10-21 21:27:58-07:00, jamesclv@us.ibm.com [PATCH] Allow more APIC irq sources The "irq_vector[]" array is indexed by the sum of all RTEs in all I/O APICs, and is not necessarily limited by the x86 CPU irq vector inputs. In fact, the irq vector index would overflow on big machines with lots of IO APIC's, causing the boot to fail. So grow the array for the big SMP boxes, keeping the default the same as before (and shrink the vector entry size down to a 8-bit value, since that's the size of the actual CPU vector entry). ChangeSet@1.1337.43.9, 2003-10-21 19:32:29-07:00, davidm@tiger.hpl.hp.com ia64: Patch by Arun Sharma: fix allocation/handling of GDT shared page (the old code was inconsistent and in places still assumed there is both a GDT and a TSS shared page, but the latter was removed a long time ago). ChangeSet@1.1337.43.8, 2003-10-21 17:52:58-07:00, davidm@tiger.hpl.hp.com ia64: Fix efi_mem_type() and efi_mem_attributes() to avoid potential underflows. In my case, the underflows occurred with the first memory descriptor which got trimmed down to a size of 0. Due to the underflow, this descriptor ended up covering the entire address-range which in turn caused Bad Things to happen with the X server. ChangeSet@1.1337.46.2, 2003-10-21 19:27:28-04:00, jgarzik@redhat.com [libata] Integrate Serial ATA driver into kernel tree. ChangeSet@1.1337.46.1, 2003-10-21 19:25:04-04:00, jgarzik@redhat.com [libata] Merge Serial ATA core, and drivers for: Intel ICH5 (production) ServerWorks / Apple K2 (beta) VIA (beta) Silicon Image 3112 (broken!) Various Promise (alpha/beta) ChangeSet@1.1337.45.2, 2003-10-21 21:55:29+01:00, alex@de.rmk.(none) [ARM PATCH] 1692/1: Shark: PCIMEM_BASE Patch from Alexander Schulz This patch adds the define for PCIMEM_BASE so that the shark kernel compiles again. ChangeSet@1.1337.43.7, 2003-10-21 13:54:20-07:00, davidm@tiger.hpl.hp.com ia64: Fix IA-32 NPTL fixes so things compile again. ChangeSet@1.1337.45.1, 2003-10-21 20:42:14+01:00, dave.jiang@com.rmk.(none) [ARM PATCH] 1691/1: Fix IOP321 platform booting in 2.6 Patch from Dave Jiang The fix allows IOP321 based platforms to boot all the way instead of blank screen after "starting kernel...". Inherited from Deepak's earlier patch. ChangeSet@1.1337.43.6, 2003-10-21 12:34:19-07:00, davidm@tiger.hpl.hp.com ia64: Based on patch by Arun Sharma: fix IA-32 subsystem to support NPTL. ChangeSet@1.1337.41.8, 2003-10-21 07:56:24-07:00, B.Zolnierkiewicz@elka.pw.edu.pl [PATCH] fix drivers/ide/pci/cmd640.c for CONFIG_PCI=n CMD640 driver also supports VLB version of the chipset, therefore fix drivers/ide/Makefile to include pci/ subdir even if CONFIG_BLK_DEV_IDEPCI=n. ChangeSet@1.1337.41.7, 2003-10-21 07:56:07-07:00, hunold@linuxtv.org [PATCH] Fix bugs in analog tv i2c-helper chipset drivers - remove cruft, memset() i2c-client structures in tda9840, tea6420, tea6415c driver, otherwise i2c_register()/kobject() segfaults later on ChangeSet@1.1337.41.6, 2003-10-21 07:55:50-07:00, hunold@linuxtv.org [PATCH] Fix bug in saa7146 analog tv i2c-handling - remove cruft, add I2C_ADAP_CLASS_TV_ANALOG identifier for analog tv i2c handler ChangeSet@1.1337.41.5, 2003-10-21 07:55:40-07:00, hunold@linuxtv.org [PATCH] Fix bugs in various DVB drivers - DVB networking uses big endian crc32, so change all occurences of crc32_le to crc32_be - fix usage of firmware location Kconfig option in tda1004x frontend driver - add missing VBI line decoding initialization to saa7113 code for av7110 driver - make av7110 firmware static and *not* __initdata, so recover_arm() can work in case the driver is compiled in statically ChangeSet@1.1337.1.21, 2003-10-20 23:26:45-07:00, davem@nuts.ninka.net [NET]: sysctl_net_core.c needs linux/module.h ChangeSet@1.1337.1.20, 2003-10-20 22:59:22-07:00, da-x@gmx.net [NET]: Fix sysctl breakage during network device renaming. Sysctl assumes its ctl_table.procname field is const, but the networking points ctl_table.procname to dev->name. When renaming a network device using SIOCSIFNAME, dev->name is modified and sysctl's assumption breaks, causing this behaviour, at least: 1. sysctl wouldn't be able to remove the proc entry when the device requests to be unregistered, because it would be using the new name instead of the old one. 2. proc entries for devices remain with the old name after rename. This change includes allocating the current device name to a new copy upon registering with sysctl, plus re-registering with sysctl when the device is renamed. This only fixes IPv4, IPv6, and net/core/neightbour.c. Fixes for ax25 and decnet are also planned. ChangeSet@1.1337.1.19, 2003-10-20 22:34:44-07:00, davem@nuts.ninka.net [LLC]: Make LLC2 compile with PROC_FS=n ChangeSet@1.1337.1.18, 2003-10-20 22:29:51-07:00, kuznet@ms2.inr.ac.ru TCP: do not return -EINTR, when data are available for read() ChangeSet@1.1337.41.4, 2003-10-20 21:34:10-07:00, viro@parcelfarce.linux.theplanet.co.uk [PATCH] Fix initrd with devfs enabled This fixes initrd with devfs. With that combination the late-boot code does temporary mount of devfs over rootfs /dev, which made /dev/initrd inaccessible. For setups without devfs that didn't happen. The fix is trivial - put the file in question outside of /dev; IOW, we simply replace "/dev/initrd" with "/initrd.image" in init/*. Confirmed to fix the problem by Valdis Kletnieks ChangeSet@1.1337.42.3, 2003-10-20 23:54:43-04:00, len.brown@intel.com [ACPI] Broken fan detection prevents booting (Shaohua David Li) http://bugme.osdl.org/show_bug.cgi?id=1185 ChangeSet@1.1337.42.2, 2003-10-20 22:31:27-04:00, len.brown@intel.com [ACPI] fix !CONFIG_PCI build use X86 ACPI specific version of eisa_set_level_irq() http://bugzilla.kernel.org/show_bug.cgi?id=1390 ChangeSet@1.1337.44.4, 2003-10-20 16:55:41-07:00, neilb@cse.unsw.edu.au [PATCH] kNFSd - In READDIRPLUS reply, don't return a file handle for a mounted directory. ... as if "nohide" is in used, it will be the wrong filehandle, and returning a filehandle is optional anyway. ChangeSet@1.1337.44.3, 2003-10-20 16:55:32-07:00, neilb@cse.unsw.edu.au [PATCH] md - Use sector rather than block numbers when splitting raid0 requests. When raid0 needs to split a request, it uses 'block' (1K) addresses rather than sector (512b) addresses, which causes problems if the sector address is odd. This patch fixes the problem. Thanks to Andy Polyakov ChangeSet@1.1337.44.2, 2003-10-20 16:54:02-07:00, kraxel@bytesex.org [PATCH] Fix bttv BUG() at video-buf.c:378 As found by Herbert Xu: the last v4l update broke bttv. videobuf_iolock was passed a vb that has just been filled with zeros. Fixed like this. ChangeSet@1.1337.44.1, 2003-10-20 16:49:55-07:00, B.Zolnierkiewicz@elka.pw.edu.pl [PATCH] fix drivers/ide/pci/siimage.c for PROC_FS=n From: "Noah J. Misch" The Silicon Image driver is not building properly when CONFIG_PROC_FS is unset. This patch corrects that problem. It appears as though several utility functions at the top of drivers/ide/pci/siimage.c that the driver always needs accidentally fell within an #ifdef CONFIG_PROC_FS. I also removed an excess include while I noticed it. ChangeSet@1.1337.43.5, 2003-10-20 16:25:31-07:00, eranian@hpl.hp.co [PATCH] ia64: two perfmon fixes - converts hdr_cur_pos into hdr_cur_offs to avoid leaking kernel addresses to userland. As a consequence hdr_last_pos is gone. - correct buffer saturation mode bug by which the hdr_count would be reset, leading to no visible samples collected. ChangeSet@1.1337.43.4, 2003-10-20 16:20:38-07:00, arun.sharma@intel.com [PATCH] ia64: make strace of ia32 processes work again Newer versions of strace manipulate the syscall arguments and to make this work for ia32 processes, we need to reload the syscall args after doing the syscall-trace callback. ChangeSet@1.1337.43.3, 2003-10-20 16:07:57-07:00, davidm@tiger.hpl.hp.com ia64: Sync with i386 irq.c (deadlock avoidance for certain disable_irq()/ enable_irq() sequences). ChangeSet@1.1337.43.2, 2003-10-20 16:05:49-07:00, jbarnes@sgi.com [PATCH] ia64: zero out topology related sysfs nodes Tony pointed out (thanks Tony) that in -test8 kobject_set_name() will try to free a kobject's k_name field if it's non-NULL, so we need to zero it out in case kmalloc() gave us recycled memory or we'll try to kfree a bogus area. ChangeSet@1.1296.83.32, 2003-10-20 11:54:48-07:00, bjorn.helgaas@hp.com [PATCH] ia64: fix EFI memory map trimming This fixes a problem in EFI memory map trimming. For example, here's part of the memory map on my i2000: mem00: type=4, attr=0x9, range=[0x0000000000000000-0x0000000000001000) (0MB) mem01: type=7, attr=0x9, range=[0x0000000000001000-0x0000000000088000) (0MB) mem02: type=4, attr=0x9, range=[0x0000000000088000-0x00000000000a0000) (0MB) mem03: type=5, attr=0x8000000000000009, range=[0x00000000000c0000-0x0000000000100000) (0MB) mem04: type=7, attr=0x9, range=[0x0000000000100000-0x0000000004000000) (63MB) mem05: type=2, attr=0x9, range=[0x0000000004000000-0x00000000049ba000) (9MB) mem06: type=7, attr=0x9, range=[0x00000000049ba000-0x000000007ec0b000) (1954MB) ... There's a hole at 0xa0000-0xc0000, so we should ignore all the WB memory in that granule. With 16MB granules, the existing code trims like this (note the 4K page at 0x0 should have been ignored, but wasn't). ChangeSet@1.1337.1.16, 2003-10-19 00:12:20-07:00, herbert@gondor.apana.org.au [NET]: More build fixes for CONFIG_XFRM disabled. ChangeSet@1.1337.1.15, 2003-10-19 00:09:56-07:00, akpm@osdl.org [NET]: Make register_netdevice return correct error when driver init function fails. ChangeSet@1.1337.1.14, 2003-10-19 00:08:39-07:00, rmk@arm.linux.org.uk [NET]: Prevent 'eth0: driver changed get_stats after register' from lying. ChangeSet@1.1337.1.13, 2003-10-19 00:07:51-07:00, bdschuym@pandora.be [EBTABLES]: Adjust skb->pkt_type when necessary. ChangeSet@1.1337.1.12, 2003-10-18 00:11:55-07:00, davem@nuts.ninka.net [NET]: Undo deprecation of init_etherdev, we will add it back once all in-tree drivers are fixed. ChangeSet@1.1337.1.11, 2003-10-18 00:07:42-07:00, zwane@arm.linux.org.uk [IPV6]: Fix sit.c compilation w/o CONFIG_XFRM. ChangeSet@1.1296.83.31, 2003-10-17 22:58:27-07:00, davidm@tiger.hpl.hp.com ia64: Don't mix code and declarations (not C90-compliant). ChangeSet@1.1296.83.30, 2003-10-17 22:55:18-07:00, davidm@tiger.hpl.hp.com ia64: Fix printk format error. ChangeSet@1.1296.83.29, 2003-10-17 22:51:49-07:00, davidm@tiger.hpl.hp.com ia64: Add missing exports to modules build again. ChangeSet@1.1337.1.10, 2003-10-17 14:39:22-07:00, torvalds@home.osdl.org Linux 2.6.0-test8 TAG: v2.6.0-test8